Tutorial: Making A Brushed Yarn Wig
PVA Glue (also called white glue, it’s an easily available glue that goes on white and dries clear. PVA is best as a result of it dries versatile.)
Fabric (gentle colored fabrics only as a result of darkish colours might stain. calico and cotton work finest, simply attempt steer clear of thin fabrics. You want something durable.)
Scissors (sharp fabric scissors)
Elastic band (elective)
Paint brush (an old one preferably since you’ll be using it with glue)
If you’re working on a Monster Excessive or comparable then be sure they are completely de-haired before starting. If you’re working on a BJD take off all their clothes and their wig.
Then minimize a large piece of cling wrap, and place it on their head (you may do this step for MH but I don’t are likely to, I just glue things straight to their head). Wrap it really tight to your dolls head and attempt to get a minimum amount of wrinkles. Secure it round your dolls neck with an elastic band (elective: it ought to stay I similar to the additional security)
2. Making the Cap
Lower a wide strip of your fabric that’s long enough to go around your doll’s head with a bit left over. Be certain it’s large enough to return proper down over your dolls forehead and only go away a small hole in the midst of the pinnacle. You need to make the cap greater than it needs to be so you possibly can cut it back.
Get your paint brush and paint a large strip of glue round your dolls head over the cling wrap (or just on their head if you’re utilizing a MH doll).
Stick one end of your fabric strip in the glue and hold it in place whilst you pull the remainder of the strip tight round your dolls head. Ensure it comes down far sufficient to cover your dolls forehead, ears and down the back of their head. Additionally make certain it’s really tightly wrapped. Don’t fear if it doesn’t sit flat to the pinnacle in all places, we’ll deal with that in a bit.
Trim the end of the strip to size (be certain that it overlaps the other end though) and glue it down.
To make sure everything sits flat, use your scissors to chop little slits into the sting of the strip closest to the crown of the top.
Glue these pieces down so that they overlap and sit flat to the top. You might have to make use of your fingers to push them really flat. It works greatest if the fabric is really saturated with glue.
Now we need to fill in the big hole on prime. Cut a square of fabric that is massive enough to cover the outlet after which some. Cover any remaining cling wrap in glue and pop the square on top of the outlet. DON’T PUSH THE SIDES DOWN But! Simply let it sit there.
Take your scissors and minimize slits round the edge of the square.
Then rigorously glue the pieces down so that they overlap and sit flat to the top. You may have to use your fingers to actually press these strips down. As soon as it’s all pressed down securely then set your doll apart to dry.
Be aware: For MH dolls with ears (Clawdeen, Rochelle, Toralei ect) I exploit a second extensive strip instead of a square, and then fill in any gaps with small triangle shapes. Below you may see a wig cap for a customised Rochelle I am working on.
3. Finishing Up
When the top of your wig cap is dry you’ll be able to fastidiously remove it and the cling wrap from your doll’s head. Fastidiously peel off the cling wrap and let the cap dry completely. Once it’s dry completely coat the skin of the cap with a layer of PVA glue and allow to dry. Then coat the inside and let dry. This simply strengthens the cap, so it won’t disintegrate when you’re sewing on the wefts.
When the cap is completely dry, put it back on your dolls head. It must be a tight fit (When you have a MH with ears you will most likely must squeeze their ears collectively to get the cap again on) If it won’t go on, you’ll be able to lower some little slits in the edge.
Mark where you want the edge of the cap to be with a pencil.
Take the cap off your doll and minimize it how to put a lace wig slightly longer than the line you marked . Pop it again on their head and re-mark accordingly. Refine the match till you may have a form you’re proud of (my form ended up a bit different to my preliminary marks).
And that’s your wig cap carried out! On to part 2!